请选择 进入手机版 | 继续访问电脑版

EDABOSS电子论坛

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
查看: 517|回复: 1

[咨询求助] 在用K7芯片例化一个MAC核的例子工程中包一个顶层出现错误...

[复制链接]

9

主题

6

回帖

52

E币

技术员

Rank: 2

积分
24
发表于 2019-11-28 14:49:29 | 显示全部楼层 |阅读模式
我用K7芯片在ISE生成一个MAC核,例子工程编译没有错误,但是我在例子工程之中包了一层我自己的顶层就出现了这个错误,怎么解决?
Place:1073 - Placer was unable to create RPM[BUFIO_RPMs] for the component U1/U1/trimac_fifo_block/trimac_block/rgmii_interface/bufio_rgmii_rx_clk of type BUFIO for the following reason.
The reason for this issue:
Some of the logic associated with this structure is locked. This should cause the rest of the logic to be locked. A problem was found at site TIEOFF_X0Y214 where we must place BUFIO U1/U1/trimac_fifo_block/trimac_block/rgmii_interface/bufio_rgmii_rx_clk in order to satisfy the relative placement requirements of this logic. It is not legal to place this component in this site.  The following components are part of this structure:
   BUFIO   U1/U1/trimac_fifo_block/trimac_block/rgmii_interface/bufio_rgmii_rx_clk
   IOB33V   RGMII_RXC_0<0>
Pack:1654 - The timing-driven placement phase encountered an error.
积分规则
回复

使用道具 举报

4

主题

23

回帖

26

E币

技术员

Rank: 2

积分
31
发表于 2019-12-2 10:13:39 | 显示全部楼层
看看生成工程中constraint有些东西是不是要包到你的工程里
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|EDABOSS电子论坛

GMT+8, 2024-3-29 10:16 , Processed in 0.038323 second(s), 20 queries .

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表